Examples
Example 1
Calculate the resistance of a piece of aluminum that is 20cm long and has a cross-sectional area of 10-4m2. What is the resistance of a piece of glass with the same dimensions? ?Al=2.82?10-8?.m, ?glass=1010?.m.
Solution
The resistance of aluminum
The resistance of glass
Notice that the resistance of aluminum is much smaller than glass.
________________________________________
Example 2
A 0.90V potential difference is maintained across a 1.5m length of tungsten wire that has a cross-sectional area of 0.60mm2. What is the current in the wire?
Solution
From Ohm’s law
therefore,
________________________________________
Example 3
(a) Calculate the resistance per unit length of a 22 nichrome wire of radius 0.321mm. (b) If a potential difference of 10V is maintained cross a1m length of nichrome wire, what is the current in the wire. ?nichromes=1.5?10-6?.m.
Solution
(a) The cross sectional area of the wire is
The resistance per unit length is
(b) The current in the wire is
Nichrome wire is often used for heating elements in electric heater, toaster and irons, since its resistance is 100 times higher than the copper wire
________________________________________
Example 4
A 2.4m length of wire that is 0.031cm2 in cross section has a measured resistance of 0.24W. Calculate the conductivity of the material
Solution
________________________________________
Example 5
A 0.9V potential difference is maintained across a 1.5m length of tungsten wire that has cross-sectional area of 0.6mm2. What is the current in the wire?
Solution
From Ohm s law,
________________________________________
Example 6
A resistor is constructed by forming a material of resistivity ? into the shape of a hollow cylinder of length L and inner and outer radii ra and rb respectively as shown in the figure. In use, a potential difference is applied between the ends of the cylinder, producing a current parallel to the axis. (a) Find a general expression for the resistance of such a device in terms of L, ?, ra, and rb. (b) Obtain a numerical value for R when L=4cm, ra=0.5cm, rb=1.2cm, and ?=3.5?105?.m.
Solution